 |
| Tenders & Quotations |
| |
| Tender for Interior works of dining hall for IRMRA HRD facilities |
Click here to view full data in PDF format  (4.39 MB) |
| |
| To view the PDF document you require Adobe Acrobat Reader. To download the reader click here. |
| |
| |
| |
| 200 ton Press New Model |
| New Press |
Desma Type Press With strip seals & Glide ring, No Chevron packing & Gland.
All the Mounting Platen guiding PB guides bushes Mainting Parallelisms & Surface Grinding.
Heater power is 4000watts in Platen Cylindrical Tie bar ground & Hot chromium platter for moving platen guide Top & Bottom Bolsters are solid plate.
PID control with SSR for maintaining +/- 1* in Temp. PLC for control Auto Cycle ie breathing / Curing & Mould open. |
| |
| 200 Ton one Day Light & two Cylinder Desma Type Lab Press |
 |
Bore Dia |
: |
210mm with 320 Bar working Pressure |
|
Stroke |
: |
400mm |
|
Day Light |
: |
600mm |
|
Plate Size |
: |
1350 x 600 x 50 |
|
Power HP |
: |
10HP |
|
Speed |
: |
30mm / Sec. |
|
Pressing Speed |
: |
1.3mm / Sec. |
|
Return Speed |
: |
By Cavity |
|
Lubrication |
: |
By Hand Oil |
|
Operation |
: |
a) Inch Mode |
| |
|
|
b) Single Cycle Mode |
|
Heater |
: |
Round Rod Heater |
|
Temp. |
: |
Max. 210 Spare Temp Controller with Timer |
|
PLC |
: |
Logo PLC Siemens Make for auto cycle |
|
Pump Make |
: |
LP-Yuken, HP- polyhedron |
|
Valve Size & Make |
: |
06- Yuken / polyhedron with pcm block |
|
Oil Tank Size |
: |
200 Lts. max |
|
| |
| Terms & conditions for bidding : |
|
Tender should be submitted separately for technical bid and commercial bid separately |
|
The tenders to be submitted in a sealed envelop clearly indicating on the cover |
|
“Sealed Tender for supply of Hydraulic Press” – Due on 3.00 p.m. on 15-12-2011 |
|
Commercial bid must include Price of the item, VAT, Excise, Packaging / forwarding cost without any ambiguity |
|
| |
| Last date for submitting quotation 15.00hrs 15th December 2011 |
| |
| All quotations should be addressed to : |
|
Dr. P. Thavamani
Director
Indian Rubber Manufacturers Research Association (IRMRA)
Plot No : 254/1B, Road No. 16 V
Wagle Industrial Estate
Thane West
Maharshtra - 400604 |
| |
| |
| |
| Tyre Uniformity Testing Machine for Two & Three wheeler / Passenger car/ Light Truck Tyres |
| |
| This machine basically consists of the following components : |
|
Machine frame |
|
Road wheel |
|
Tire loading position with tractive motor unit |
|
Tire loading unit with electric servo screw drive |
|
3 components measurement unit to measure tire non uniformity in tractive ,lateral , &radial direction |
|
Rim unit with special design which enable the direct mounting of the tire at the loading station |
|
| |
| Technical details are as under : |
| Sr. No. |
Parameters |
| 1 |
Forces (Accuracy ± 1 N) |
| 1.1 |
Radial Force : Max. 2000 N |
| 1.2 |
Tangential force : Max 2000 N |
| 1.3 |
Lateral Force : Max. 2000 N |
| 1.3 a |
Additional provisions : |
| 1.3 b |
Lateral Force offset |
| 1.3 c |
Plysteer |
| 1.3 d |
Coincity |
| 1.3 e |
Tractive force |
| 2 |
Geometry |
| 2.1 |
Tyre radial runout |
| 2.2 |
Tyre lateral runout |
| 3 |
Test Drum |
| 3.1 |
Diameter : 854 mm |
| 3.2 |
Radial Runout : 0.05 mm |
| 3.3 |
Residual unbalance : |
| 3.4 |
Static : < 5 kg.mm |
| 3.5 |
Dynamic < 500 kg.sq.mm |
| 3.6 |
Width : 400 mm |
| 3.7 |
Tyre sizes : 12 " to 22" |
| 3.8 |
Max.load of tyre : 20,000 N |
| 3.9 |
Max. tyre pressure : 6 bar |
| 3.10 |
Tyre OD : 1100 mm Max. |
| 4 |
Accessories |
| 4.1 |
Tyre uniformity marking unit |
| 4.2 |
Test rims ranging from 12" to 22" |
| 4.3 |
Auto lubrication unit prior to measuring stage |
|
| |
| Note : Machine should confirm ISO 13326 : 1998 (E) requirements |
| |
| Please send us your technical / commercial bids separately addressed to, The Director, IRMRA within 15 days. |
| |
| All quotations should be addressed to : |
|
Dr. P. Thavamani
Director
Indian Rubber Manufacturers Research Association (IRMRA)
Plot No : 254/1B, Road No. 16 V
Wagle Industrial Estate
Thane West
Maharshtra - 400604 |
| |
